XS Instruments 70 Vio Series, Инструкция по эксплуатации

Страница: 40 / 41

40
Rev. 1 24/01/2020
EN
The software can be downloaded for free from the web site (pay attention to the correct installation of the
drivers).
• https://www.giorgiobormac.com/it/download-software_Download.htm.
• Connect the USB cable inside each package to the USB port on the top panel of the instrument and the
other end to a COM port on the computer.
• Use the USB cable supplied with the instrument only.
• Start the program and then switch on the instrument.
• Wait for connection to be established (the connection data are shown at the bottom left of the display).
•
Functions
• Download : the data saved in the instrumental memory are downloaded to a PC and displayed in the
table for processing.
• M+ : instantaneous acquisition of a value (equivalent to the manual Data Logger option).
•
Logger : automatic acquisition with set frequency.
•
Empty : emptying the data in the table. If the password is active, it will be requested.
•
Export to Excel / Export to PDF : export to PDF and Excel of all the data in the table, of graphs,
calibration reports and instrumental information.
•
Save to file / Open from file
: saving the data in the table and possibility to reload them in order to
process them or continue recording.
• Select the language : set the interface language (Eng – Ita – Deu – Esp – Fra – Cze).
• Table / Graph : how to display the acquired data. The graphs are divided by parameter and can be
printed separately.
Reproduction of
the instrument
display for real-
time
measurements
Calibration data
for each
parameter
Automatic Data
Logger
Functions
Visualization of acquired
data in table or graph
Connection data and instrument
information