12
Rev. 1.0 31/01/2020
EN
•
The instrument is equipped with an power supply unit which is not protected against any liquid
entry; therefore, for its use, it is necessary to keep all the electrical cables and connections away
from any liquids and humidity and not to use the device in a humid room, such as a bathroom or
a laundry room.
•
•
•
•
In the event of accidental loss of power during the operation of the instrument, there is no dangerous
condition for the user.
•
The instrument is NOT automatically reactivated. Press the button
to turn the device back on.
•
Power on, date and time update, power off
Turn on the system by pressing the button
. The display initially activates all segments and then
appears:
•
model and firmware of the instrument;
•
settings relating to the most important parameters and possible information about the DHS sensor;
On first use, and after each battery replacement, the instrument during the start-up phase will request the
updating of the date and time.
•
Using the directional keys, update the year and confirm with the key
. Carry out the same
operation with the month and day, and subsequently with hours and minutes.
•
The instrument will enter measure mode in the last parameter used.
To switch off the instrument, press the key
in measure mode.
•
Instrument transportation
To move the instrument to a new location, ship it carefully to avoid damage; the instrument can be
damaged, if it is not transported correctly.
Disconnect the instrument from the power supply and remove all the connection cables. Remove the
electrode arm from its holder.
• To avoid damage to the instrument during long distance transport, use the original packaging.
• If the original packaging is no longer available, choose a package that guarantees a safe shipment.
ATTENTION
Danger of death or serious injury from electric shock.
Contact with live components can lead to injury or death.
•
Use the adapter supplied only.
•
Do not put the power supply in contact with liquids nor in a condensing environment. Avoid
thermal shock.
•
All electrical cables and connections must be kept away from moisture or liquids.
•
Check that the cables and plugs are not damaged, otherwise replace them.
•
During use, do not cover the power supply and/or do not place it inside containers.
