TOE-IN
ANTI-SQUAT
ROLL CENTER
TRACK-WIDTH
3. REAR SUSPENSION
DIRT
CARPET
ECCENTRIC BUSHINGS HAVE TWO DIFFERENT OFFSETS FROM THE CENTER.
Middle position = 0.5° or 0.375mm from center.
Outer position = 1° or 0.75mm from center.
The XRAY rear alu lower suspension holders provide great range of adjustment for the rear suspension. Using different combinations of eccentric bushings, fine adjustment of rear anti-squat, rear toe-in, rear
roll center, and rear track-width can be obtained. For more information about the influence of rear anti-squat, rear toe-in, rear roll center and rear track width on car handling, please refer to HUDY Set-up Book
(#209100).
The tables describe the amounts of adjustment using the center and outside positions of the eccentric bushings.
The middle position eccentric bushings allow for finer adjustment increments.
The track-width is directly influenced by the size of
the wheels and tires used.
ANTI-SQUAT
ROLL CENTER
TRACK-WIDTH
TOE-IN
RR
RR
RR
RR
RF
RF
RF
RF
(°)
(mm)
(mm)
(°)
=2
°
=3
°
=1
°
=3
°
=2
°
=4
°
=1
°
=2
°
=0
°
=2
°
=3
°
=1
°
=1
°
=2
°
=0
°
=3
°
=4
°
=2
°
=
+
1.5
mm
=0
mm
=-1.5
mm
=
+
0.75
mm
=0
mm
=-0.75
mm
➊
NOTE ORIENTATION
NOTE ORIENTATION
17
SHORT
REAR SUSPENSION ARMS
#363112-H RIGHT HARD
OPTION
#363122-H LEFT HARD
OPTION
#363112-G RIGHT GRAPHITE OPTION
#363122-G LEFT GRAPHITE OPTION
LONG
REAR SUSPENSION ARMS
#363113-H RIGHT HARD
INCLUDED
#363123-H LEFT HARD
INCLUDED
#363113-G RIGHT GRAPHITE OPTION
#363123-G LEFT GRAPHITE OPTION
Marked “L”
Marked “R”
2mm
➊
➋
➌
➌
➍
➍
RF
903312
SFH M3x12
From Rear Arm
SHIM 3x6.5x2
Composite eccentric bushings
Composite eccentric bushings
Arm Reamer 3.0mm (HUDY #107643)
If the suspension arm does not move freely
use a HUDY Arm Reamer to size the holes
of the arms.
3.0mm
#363326
ALU LOWER SUSPENSION HOLDER WIDE
FOR HS BULKHEAD - RR
#363317
ALU LOWER SUSPENS. HOLDER WIDE
FOR HS BULKHEAD - RF
Check for free
movement.
0.5°
1°
INITIAL SETTING
CARPET
0.5°
1°
INITIAL SETTING
DIRT
INITIAL SETTING
DIRT
0.5°
1°
0.5°
1°
INITIAL SETTING
CARPET
