https://www.XPOtool.com
Item 61479
Page 6
The Tool Experts
04 2022
-1
Assembly
Step
1
Mount the front circlip into the wheel bearing housing as a stop.
Step
2
Position the new bearing from behind in front of the wheel bearing housing and insert the pull-out sleeve
with the spindle into the wheel bearing housing. Attach the following pull-out parts as described under
point 4 (removal). Now the installation process can begin.
Attention!
Make sure that the new bearing is positioned correctly to avoid tilting.
Step
3
After the bearing has been pulled in, the rear assembly of the extracting screw is removed again up to
the pressure sleeve in preparation for wheel hub installation and the extracting screw is pulled com-
pletely out of the axle beam. The wheel hub is now pushed onto the extracting screw in front of the
sleeve. Insert the extracting screw back into the wheel bearing housing and attach the rear pull-out parts
as usual. Now the installation of the wheel hub can begin.
