XPLORE TECHNOLOGIES ix104c4 Скачать руководство пользователя страница 26

Страница: 26 / 134

Chapter 1. Getting Started

Front view

iX104C

User’s Handbook

LED indicators

The LED indicator lights show the status of system functions.

The following table defines the various LED states.

Status LED

HDD LED

Table 1

Status LED indicator

Mode/State

LED State

Meaning

On state

green, continuous

The computer is on, ready for use, and functioning
normally. The battery is fully charged.

Charging

green, blinking

The AC adapter is plugged in and the battery is
charging.

Off state

off (no light)

The computer is off.

Suspend mode

yellow, continuous

The computer is on and is in Suspend or
Hibernation mode.

Thermal control

yellow, blinking

The computer is on and is in Warm-up mode, with
the LCD and backlight off. After the system has
warmed to a safe level, the LCD and backlight turn
on.

Содержание ix104c4







































































































































Результаты поиска

Содержание ix104c4

Отзывы:

XPLORE TECHNOLOGIES ix104c4, Руководство пользователя, Страница: 26 / 134

Результаты поиска

Содержание ix104c4

Отзывы: