The lightning bolt symbol in the triangle alerts the user to dangerous voltages on some exposed components inside the unit.
The exclamation point in the triangle points the user to important operating and maintenance (service) instructions throughout this manual that should be followed.
The device has been tested and meets the FCC standard standards of a class B device. These standards were developed to avoid or reduce interference with other
domestic electrical appliances. This equipment may cause radio waves, and if not installed as directed, may cause interference to the radio or television, for example,
when the equipment is turned on or off.
Operation manual
Follow the safety instructions and instructions in this manual.
This manual should be kept secure for future reference.
Safety instructions (installation and operation)
Never touch the device with wet or wet hands.
The device can only be operated with the voltage described on the rear panel and on the power supply unit.
This device should not be positioned near moisture and water.
Do not place the device on an unstable surface. The device could be damaged or people injured. Any fixings should only be installed according to the manufacturer's
information or obtained from the manufacturer.
The cable is sheathed and isolates the current. Please do not place any objects on the cable as this may result in loss of the protective function. Avoid heavy loads on
the cable, especially on sockets and plugs.
If you want to remove the plug from the socket, always pull on the plug and not on the cable. Otherwise, the cable could break.
To protect the device during a thunderstorm or when left unattended for a long time: Disconnect the plug from the wall outlet. This prevents damage due to lightning
strikes.
An outdoor antenna should not be installed near power lines or other circuits. When mounting such antennas, extreme care should be taken, as contact with such
cables can be fatal.
Do not overload electrical outlets, extension cords or other wiring, as this may result in fire or electric shock.
No objects may be introduced into the openings of the device, as in some places electricity flows and the contact may cause fire or electric shock.
Disconnect the power plug from the socket for cleaning.
Do not use liquid cleaners or cleaning sprays. The device may only be cleaned with a damp cloth.
Do not connect accessories that are not recommended by the manufacturer.
The openings of the housing are used for ventilation, so that the device does not overheat. These must always be kept free.
1
Safety Instructions
Содержание DAB100
Страница 1: ...User Manual Version 2...
Страница 10: ......
