Xorcom GW0017, Руководство пользователя

Страница: 16 / 88

GW0017 User Manual
11
3
Basic Operation
3.1 Methods to Number Dialing
There are two methods to dial telephone number or extension number:
⚫
Dial the called number and wait for 4 seconds for dialing timeout, or dial the called
number directly (the system will judge whether the dialing is completed according to
Digitmap and Regular Expression dialplans).
⚫
Dial the called number and press #.
3.2 Direct IP Calls
The GW0017-128S gateway allows users to call directly through IP address. Under this
circumstance, the user only needs an analog phone connected to a FXS port of the gateway,
and calls can be established without register.
Calls can be established through an IP address as long as one of the following conditions is
met.
1) Both the GW0017-128S and other VoIP device have public IP addresses;
2) The GW0017-128S and other VoIP device use private IP addresses of a same LAN;
3) The GW0017-128S and other VoIP device can be connected through a router and use
public or private IP addresses (with necessary port forwarding or DMZ).
Operation Process
：
Step1: Pick up the analog phone and then dial
“
*47
”
;
Step2: Enter the target IP address.
Note
：
No dial tone will be played between step 1 and step 2
Example:
Assume that the target IP address is 192.168.0.160, user need to dial *47 and then
192*168*0*160. After that, press the
“
#
”
key or wait 4 seconds. Then signaling interaction
is completed and ringing can be heard .