19
XM-RSU225BT
DE
Topic:
Basic functions
6.
Loudness on/off
(prompt "
LOUOF
" on the screen)
7.
Equalizer on/off
(prompt "
EQOFF
" on the screen)
8.
Local function on/off
(prompt "
DX
" on the screen)
9.
Stereo/Mono switch
(prompt "
ST
" on the screen)
Press
long
the rotary button or the
SEL
button on the remote control to switch
between following settings:
1.
AF function on/off
(prompt "
AF ON
" on the screen)
2.
TA function on/off
(prompt "
TAOFF
" on the screen)
3.
PTY function on/off
(prompt "
PTYOF
" on the screen)
4.
Traffic announcement (TA) settings
(prompt "
TASEK
" on the screen)
5.
Sound during frequency band scan
(prompt "
PISOUND
" on the screen)
6.
Searching time for stations with PI
label
(prompt "
RETUR L
" on the screen)
7. Key sounds
on/off
(prompt "
BEPON
" on the screen)
As soon as you choose one of the
functions to set, rotate the button to
maximize/minimize the corresponding
factor.
You can also use fro that the button
VOL-
/
VOL+
on the remote control.
* If the preset EQ is active, the BASS
Basic functions
Mode choice
Press the
?
/MOD
button on the
front panel or the
MOD
button on the
remote control to switch between the
modes:
Radio
,
AUX
,
USB
and
SD
.
Loudness
Use for that the rotary button on the
front panel.
Rotate the button clockwise to boost
the loudness and reverse to reduce the
loudness.
You can also change the volume pres-
sing the button
VOL-
/
VOL+
on the
remote control.
Settings
Press
briefly
the
rotary button
or the
SEL
button on the remote control
several times to switch between follo-
wing settings:
1.
LED color settings
(prompt "
AUTO
" on the screen)
2.
Bass settings*
(prompt "
BAS
" on the screen)
3.
Treble settings*
(prompt "
TRE
" on the screen)
4.
Balance settings
(prompt "
BAL
" on the screen)
5.
Fade settings
(prompt "FAD" on the screen)
