XO Appliance XOMI ISLAND XOMI36GC, Руководство пользователя

Страница: 13 / 68

- 13 -
B
X
A
B
B
27” to 32”
installation
1
2
3
- Remove the structure from the packaging and
remove the 2 screws A to separatethe upper
part from the lower part (Fig.1) .
- Position hole template on the ceiling paying
attention that the arrow is positioned on the
same side as the appliance controls (Fig.2) .
Make 4, Ø8 holes in the ceiling and drive in 3
screws without completely tightening them. Pay
attention not to insert the screw into the hole
marked with an X on the hole template (the
screws and expansion plugs must be suitable
for the type of wall).
- Take the upper part of the structure B (Fig.3)
and insert the 3 slots onto the 3 screws that are
not completely tightened. Rotate slightly to fit
(Fig.3) . Drive in the fourth screw X and tighten
the remaining 3 to allow definitive blocking of
the upper part ofstructure B .
- Take the lower part of the telescopic structure
C and insert it into the upper structure B (Fig.4) .
Adjust the height by referring to the amounts in-
dicated in (Fig.5) and block it usingthe 8 screws
G that are supplied (Fig.6) .
- Fix the flexible pipe to the prepared air eva -
cuation hole (Fig.7) .
- Take the upper chimney piece and fix it to the