237
Reset totals now
You can reset the totals anytime by pressing this button.
Also this command will not restart a disabled interface. You have
to restart the corresponding service at "System > Services".
14.1.2.3-F
Channel bundling
MPPP activated (128 kbit/s)
This tab can activate channel bundling using MPPP. This option is exclusively available
for the ippp0 interface and has to be supported by the provider. When bundling, the
second ISDN channel of the ISDN card will be connected to the provider whenever
the used bandwidth exceeds a configurable threshold. Thus the available bandwidth
is doubled.
Please note that in this way, two ISDN lines will be occupied and
of course you will also be charged for both lines. In general, the
provider charges extra fees for the second line as well.
Trigger 2nd channel when
Whenever the specified bandwidth is used for the given period of time, the second
ISDN channel is added to the Internet link.
14.1.2.3-G
Routing
Policy Routing
On this tab you can configure static routing entries. You can add conventional routes,
considering only the packet's destination, but also extended rules which include source
addresses, protocol and port numbers (policy based routing).
Static routes must be added for networks behind the peer. Specify the network address
and the netmask of this remote network - this will automatically instruct the SX-GATE
firewall to accept the network on this interface.
Rules for specific protocols or sources come into play if multiple internet links are
available. One could for instance direct web traffic via an ADSL link while all the other
traffic like emails and VPN uses an SDSL line.
Содержание SX-GATE
Страница 1: ...State 2016 12 13 V7 0 2 0 User Guide ...
Страница 92: ...12 1 Setup 92 There s no way to restore a purchased certificate without backup ...
Страница 126: ...12 3 3 Groups 126 12 3 3 C Usage This table show in which settings the definition is used ...
Страница 476: ...15 3 Apple iPhone 476 ...