210
The IDS operates in a passive mode, i.e. it logs but does
not intercept malicious packets. In active mode the IDS
runs as part of the firewall on the Internet interface.
IPv6 mode
Select the kind of IPv6 connectivity.
manual IP
If this option is selected, all IPv6 parameters have to be configured manually.
Router advertisements will be ignored.
automatic IP (SLAAC/DHCPv6)
Choose this option and SX-GATE will automatically determine its IPv6
configuration based on the router advertisements it receives.
14.1.2.1-A
IP addresses
IPv4 address
Specify the IPv4 address that the corresponding SX-GATE interface should use as
its own address. The IP address of the interface eth0 must be changed at "System >
Setup".
The IP address assigned here may not be part of an IP subnet
which has already been assigned to an other Ethernet or VLAN
interface.
IPv4 netmask
Here you have to specify the netmask corresponding to the IP address.
IPv4 default gateway
Simplifying things, a default gateway is a router linking to the Internet. If such a router
is connected to this interface you have to enter its IP address here. In "Modules >
Network > Settings" you can select which interface is to be used to connect to the
Internet. Selecting this interface, SX-GATE will setup a default router via the gateway
specified here.
Additional IPv4 addresses (aliases) / Cluster IP addresses
You can specify additional IP addresses for the select network interface. You can add
addresses belonging to the same IP subnet as the primary address. This is useful
Содержание SX-GATE
Страница 1: ...State 2016 12 13 V7 0 2 0 User Guide ...
Страница 92: ...12 1 Setup 92 There s no way to restore a purchased certificate without backup ...
Страница 126: ...12 3 3 Groups 126 12 3 3 C Usage This table show in which settings the definition is used ...
Страница 476: ...15 3 Apple iPhone 476 ...