background image

 

 

 
 
As a parent, your child‟s safety is your first priority. Riding an off-road motorcycle is very fun. However, 
just like riding a bicycle, bad decisions can result in injury. As a parent, you can greatly prevent 
accidents by making informed decisions about if, when and how your child will ride. Always supervise 
your child when he/she is riding. 
 
Before you allow your child to ride, you need to decide if he/she is capable of riding. Riding readiness 
can vary tremendously from one person to another. Age and size are not being the only factors that help 
determine one‟s riding readiness. There are three other factors that you should also consider before 
deciding if your child is ready to ride. 
 
First, consider the 

physical ability

 of your child. Riders must be able to hold the motorcycle up, get on, 

and sit comfortably with both feet on the ground. The rider must also be able to reach all of the controls 
on the handlebars and work the brakes and clutch. Second, consider your child‟s 

athletic ability

. Your 

child should be good at riding a bicycle before riding a motorcycle. Determine if your child can judge 
speeds and distances while riding a bicycle and react with the proper hand and foot actions. Any person 
who does not have good coordination, balance, and agility should not ride this motorcycle. 
 
Finally, determine your child‟s level of 

mental maturity.

 It is imperative that you are honest with 

yourself when you ask yourself the following questions: Does your child think through problems and 
come to logical conclusions? Does your child obey your rules when they ride their bicycle? If your child 
makes bad judgments, takes un-warranted risks and/or does not obey your rules, they should not ride this 
motorcycle. 
 
If you have decided that your child is ready to ride, please remember the following points and never let 
your child ride without a helmet. It is up to you (parent) to ensure your child‟s safety, even if they learn 
to ride from another experienced adult. Never push your child to try things faster than they are willing or 
capable. Always supervise your child when they are riding and regularly remind them about safety rules. 
As a parent it is your responsibility to be sure that the motorcycle is properly maintained and kept in safe 
operating condition. 
 
Modifying this motorcycle or using parts not manufactured by Xmotos can make your motorcycle 
unsafe. Before you consider making any modifications or adding an accessory, please read the following 
information carefully. 
 
                          Improper accessories or modifications can cause a crash in which you can be seriously 
hurt or killed. Follow all instructions in this owner‟s manual regarding and accessories.

 

 

Xmotos strongly recommends that you do not remove any original equipment or modify your 
motorcycle in any way that may alter the design and/or operation. Such a change could drastically 
impair the stability, handling, acceleration, and braking capabilities of the motorcycle and cause a crash. 
We also strongly suggest that you do not make any modifications to the exhaust system, noise control 
system or emission control components.

 

 

 
 

 IMPORTANT SAFETY INFORMATION FOR PARENTS 

Содержание XZ 250R















































































Отзывы: