Xmotos XZ 250R, Руководство пользователя

Страница: 27 / 78

27
If the engine fails to start after repeated attempts, it may be flooded with excess fuel. Follow the steps
below to clear a flooded engine.
1.
Press the engine stop switch and hold it.
2.
Open the throttle completely.
3.
Press the engine start switch and hold it for 5 seconds. (Electric Start)
4.
Kick start the engine several time. (Kick Start)
5.
If necessary remove the spark plug and let it dry.
6.
Once the engine starts, open the throttle ¼ for a few times.
To stop the engine, shift into neutral and push the engine stop switch on the left side of the handle bar.
For your safety, avoid starting or operating the
motorcycle in an enclosed area with poor ventilation,
such as a garage. The motorcycle’s exhaust gas contains
poisonous carbon monoxide which can collect rapidly in
an enclosed area and
result in illness or death.
CAUTION
DO NOT ride your motorcycle with full load and DO NOT
rev up the engine when cold. Since the piston warms up
and expands faster than the water cooled cylinder, this
might cause engine damage. Always let the engine idle
until warm or ride it warm at low RPM speeds.
CAUTION
FLOODED ENGINE
STOPPING THE ENGINE
LC / ZS / V4 SERIES RM SERIES
BASIC OPERATION & RIDING