SNMP06 LAN CARD
REFERENCE MANUAL
_______________________________________________________
SNMP-06 (161212) 9
5- EMAILS CONFIGURATION
This card can send emails using accounts based on SNMP, SSL or TTL servers. Check SYSTEM
CONFIGURATION / E-mail to check parameters to be configured like: email server name, email account
name & password, receivers, etc.
EMAIL SENDER:
SMTP server:
Describes email server to be used to send emails. For example:
“smtp.xxxxxxxxxxx.com”.
Security Type:
We must select kind of email server to be used:
NONE: Usually for web-domain email servers.
SSL: For servers with security SSL like Gmail, Yahoo, etc
TLS: Para servidores de emails con seguridad TLS like Hotmail.
Port:
Usually 25 (for SMTP servers)
Usually 465 (for servers SSL)
Usually 587 (for servers TLS)
Check with your email provider
Send from:
Configure name of the email account to be used to send emails. For
example:
User name:
Configure user name of the email account to be used to send emails.
Usually same tan email account name.
Need Authorization: Check this option for accounts that require Authorization (“Need Auth”)
Password:
Email account password.
APPLY
It is necessary to select APPLY to save modifications.
EMAIL RECEIVERS:
In these fields you can configure up to 8 receivers. Do APPLY for each receiver added.
SNMP06 LAN CARD
REFERENCE MANUAL
_______________________________________________________
SNMP-06 (161212) 10
Once email section has been configured we suggest to do a TEST by selection TEST button.
System will response with a message: “TEST SUCCESSFULL” when email has been sent without
errors. In case email cannot be sent because an error in any of the configured above fields, system will
show a failure message.
IMPORTANT: If card informs problems to send emails it can be caused by 2 reasons:
1.- A mistake in any of the data fields
2.- DNS has not been saved automatically in the card.
ACTIONS:
a)
Check SYSTEM CONFIGURATION / SNMP Configuration / network settings
b)
Revise if DNS fields shows appropriate DNS. If it shows 0.0.0.0, user must introduce
manually DNS of the network and do APPLY.
Test Successfull