www.xldisplays.co.uk
01733 511 030
Assembly Instructions
Centro Slatwall
2
Affix upper post to lower post by
positioning and rotate until assembly drops
into position, female end centrally over
male fitting (C), continue rotating
clockwise through 90º to secure (D).
A
1
B
Place base plate on the floor, position lower post
centrally over male fitting of base plate (A), and rotate
until assembly drops into position, continue rotating
clockwise through 90º to secure (B).
C
D
90º
3
Slot clamps of 750mm
profile into post channels
and tighten grub screws
with hex key supplied to
secure.
