XK034015/XK034016/XK034017
Motorcycle 7-Color Kit
2
Recommended Mounting Locations
Mounting Instructions
Remote Functions
Button
A
: Flash Pattern adjustment
Button
B
: Speed adjustment
Button
C
: Color adjustment
Button
D
: Turn on/off the entire light kit.
1. Test all components before mounting:
As shown below, plug all light units together and connect them to
the controller and the switch wiring harness. Connect the RED battery terminal to the POSITIVE pole of 12V
DC battery. Connect the BLACK battery terminal to the NEGATIVE pole. Turn on the switch and push the
remote buttons to exam all lights. If the light has any defective issue, please contact us and we will be happy
to replace them for you.
2.
Plan mounting locations:
Disconnect the tested lights from the vehicle’s battery and remove any bodywork
that will have the LED lights located behind them. Clean the mounting surface. LOOSELY mount the LED
lights using Scotch or painters tape (not included) to the desired locations. (DO NOT firmly attach the lights
in this step.)
3.
Mount the lights and wires:
Clean the mounting surface again. Use 3M tape to attach lights to the planned
locations. Firmly push the lights to make sure they are securely attached. Connect all splitters, extension
wires and the switch wiring harness. Apply 1 piece of 3M tape to the back of
each connections and mount them securely.
WARNING-
Do not force the
plugs together! If they don’t snap together, verify that all the pins line up. If a
pin is out of place, it must be straightened for the plug to snap together.
4.
Secure all wires and connectors:
Use provided zip ties and wire clips to
neatly mount and hide any loose wires. Make sure they are not touching
anything hot surface or located on moving parts. Locate the ON/OFF switch
in a dry and convenient location. Use provided end caps to cap all uncovered connectors.
5.
Connect to 12V DC power:
Firmly connect the wire terminals to the positive and negative poles of the
battery.
Visit
www.XKGLOW.com
to purchase extra lights and accessories.
