NVR User
’s Manual
18
3.4.2
Daylight Saving Time
Daylight Saving Time
The item is for people who live in certain regions to observe Daylight Saving
Time. Select <On> to enable, or <Off> to disable the function. If the function is
disabled, the DST Start/End time and DST Bias will be grayed out and cannot
be accessed.
NOTE:
If this function is enabled, the date/time information will be
shown on the screen with a DST icon when playing back recorded
video or searching video in the event list. “S” indicates summer time
and “W” indicates wintertime.
DST Start/End
These items are used to program the daylight saving duration. Click at the
target position and click on the UP/DOWN arrow buttons to change the value.
DST Bias
This item allows user to set the amount of time to move forward from the
standard time for daylight saving time. The available options are in minutes.
3.4.3
Network Time Protocol Setup
Time Zone
Select users
’ current time zone. Please visit
www.greenwichmeantime.com
to
find out the correct local time zone, or refer to the following figure.
