1
GPS Vehicle Tracker User Manual
Preface
Thank you for purchasing our products. This deliberately edited manual is to introduce the tracker with the
complete technical data and the instructions showing how to operate the device smoothly and correctly. Make
sure to read this manual carefully before using this product. Most problems could be solved through the
explanations and the troubleshooting tips. Once you finish reading it, keep it handy for necessary reference.
Please note that specification and information are subject to changes without prior notice in this manual. Any
change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or
omissions in this document.
Content
Ⅰ
. Preface……….…………………………….…………….……………………….….………... 1
Ⅱ
. Attentions………………………………….………………..…………………….…….…….. 1
Ⅲ
Hardware description…..…………….………………………………..………….……….… 2
Ⅳ
. Main function…………………………………………………...………………………...….. 2
Ⅴ
. Usage……………………………………………………………………………………....….. 2
Ⅵ
. Installation diagram……………………………………………….……………………..…... 4
Ⅶ
. Installation………………………………...…………………………………………..….…... 5
Ⅷ
. Application…………………...………………………………………….………………….… 6
Ⅸ.
Specification……………………………………………………………………………....……6
Ⅹ
.Guarantee……………………………………………………...……………………………… 6
Attention
1
. Make sure to read this manual carefully before using this product.
2
. Please insert the SIM card before installing, and make sure the SIM card has no password, otherwise the
tracker will not work normally.
3
. Please make sure that all the cables of the tracker has been connected rightly, and then connect the tracker to
host power. Must not install or take down the tracker when it is power on. If you found any troubles or omissions
about the connections of cables, please cut off power first, otherwise you will easily damage the tracker.
4
. The tracker works in wireless communications, so please cut off the host power before your vehicles entering
fuel depot and dangerous material place.
5
. The tracker’s work voltage is 10V-36V. Please use the tracker in the scope of work voltage.
6
. The host of GPS tracker is a low-power wireless transmitter and receiver. It receives and sends radio
frequency signal when it is working.
7
. To avoid electromagnetic interference or uncompatible configuration, please stop using your tracker in the
noticed place.