Xinje VB3-20P7, Руководство пользователя

Страница: 96 / 107

V5 series inverter
90
5
5 5
5 Fault
Fault Fault
Fault Diagnosis
Diagnosis Diagnosis
Diagnosis and
and and
and Countermeasures
Countermeasures Countermeasures
Countermeasures
5-1. 5-1. 5-1. 5-1. Fault Fault Fault Fault diagnosis diagnosis diagnosis diagnosis and and and and countermeasurs countermeasurs countermeasurs countermeasurs
When fault occurs, the function code and its contents will be shown in LED display, the protection function starts, the inverter
stops outputting and the fault relay contact point is activated.Before seeking services, the subscriber may conduct the self-
check according to the prompt given in this section, analyze the fault causes, and find out the solutions.If the fault belongs to
the causes described in the broken line box, please seek the service by contacting the inverter agent or directly contacting our
corporationl.
Table Table Table Table 5-1 5-1 5-1 5-1 Fault Fault Fault Fault content content content content and and and and countermeasures countermeasures countermeasures countermeasures
Fault
Fault Fault
Fault Code
Code Code
Code Fault
Fault Fault
Fault Type
Type Type
Type Possible
Possible Possible
Possible rrrreason
eason eason
eason of
of of
of fault
fault fault
fault countermeasure
countermeasure countermeasure
countermeasure
E-01
Over-current
during
acceleration
Too heavy the load and too short the Acc time Prolong the Acc time
V/F curve is not suitable Adjust V/F curve
The rotating motor restarts after stop Set as “start on fly” function
Too large the value of torque boost
Adjust the value of manual torque boost or change it as
auto torque
据矩提升
Inverter power is too low Select a high power inverter
E-02
Over-current during
deceleration
Too short Dec time Prolong the Dec time
The load generates energy or the load inertial is
too big
Connect suitable braking kit
Inverter power is too low Select a high power inverter
E-03
Over-current during
constant speed
Sudden change of load Check and reduce the change of load
Too short Acc/Dec time Prolong Acc/Dec time
Abnormal load Check the load
AC supply voltage is low Check AC supply voltage
Inverter power is too low Select a high power inverter
E-04
Over-voltage durning
acceleration
Abnormal input voltage Check input voltage
Too short Acc time Prolong Acc time
The rotating motor restarts after stop Set as “start on fly” function
E-05
Over-voltage durning
deceleration
Too short Dec time Prolong Dec time
The load generates energy or the load inertial is
too big
Connect suitable braking kit
E-06
Over-voltage
Durning constant
speed operation
Abnormal input voltage Check input voltage
Too short Acc/Dec time Prolong Acc/Dec time
Abnormal change of input voltage Install input reactor
Too big the load inertial Connect suitable braking kit
E-07
Inverter’s control
power supply over
voltage
Abnormal input voltage Check input power or ask for service
E-08
Inverter overheat
Vent obstructed Clean the vent
Over temperature Improve condition and decrease carrier frequency
Fan does not work Change the fan
IGBT module is abnormal Ask for help
E-09
Inverter overload Too short Acc time Prolong Acc time