Xinje DS5F Series, Руководство пользователя

Страница: 40 / 210

38
Defaulted assignment of output terminals
Terminal SO1 SO2 SO3~SO8
Function
COIN/positioning
completion
ALM/alarm Not distribute
Optocoupler type Relay type
Servo driver upper device
COM
SO X3
COM
0
V
+24
V
Servo driver upper device
+24
V
0
V
COM
X3 SO
COM
Note: the maximum allowable voltage and current capacity of collector open output circuit are as
follows:
Voltage: DC 30V (maximum)
Current: SO1 ~ SO2 DC 500mA (maximum)
SO3 ~ SO8 DC 50mA (maximum)
3.2.4 Analog input circuit
Analog input
Upper device servo driver
+10
V
-10
V
31
T-REF+
33
V-REF+
0
V
2K
Ω
1
W
32
T-REF-
34
V-REF-
Note: Analog Pin31 (External Torque Analog Differential Input+), 32 (External Torque Analog
Differential Input-), 33 (External Speed Analog Differential Input+), 34 (External Speed Analog
Differential Input-) are soldered out of the CN0 port as detailed in chapter 3.1.3.1.
Analog signals are speed or torque command signals.The input impedance is as follows:
* Speed instruction input: about 13K
* Torque instruction input: about 13K
The maximum allowable voltage of the input signal is ±10V. Do not apply the voltage above
±10V.