Xinje 4GBOX, Руководство пользователя

Страница: 17 / 28

Error4: the phone number only has read authority, but it wanted to write in
Error5: 4GBOX and PLC BWO read write failure
Error6: 4GBOX and PLC BWO read write failure
Error7: 4GBOX and PLC BWO read write failure
Error8: 4GBOX and PLC BWO read write failure
Note:
(1) all the letters must be capitalized.
(2) The command, register, operands are separated by a space, the whole message should not
exceed 99 English characters.
(3) To send the character message, quotation mark must be English half angle “
(4) Message function only support China mobile, China unicom.
3-5-2. Message (PLC => 4G-BOX => phone)
The 4GBOX will send message to user’s phone in certain condition. Please refer to below
example.
 The trigger coil should be edge signal(falling or rising edge of pulse).
 In the message configuration window, 4GBOX connects the left extension port of XD
series PLC, set the port to com3
 First address can be D or HD, these registers cannot be used in other place of program
 Support multi phone number type-in and set the phone number on the HMI, the using
method please refer to above picture, multi numbers are separated by “,”
 The message support Chinse and English contents, such as “present temp {HD0}”, and
user will receive the message “present temp 30” for example. Register analysis function
supports single and double words, such as D, DD, HD, DHD, but not support DM.