5.5
Warranty
In addition to the provisions of Article VIII of the Standard Terms & Conditions of XIMEA GmbH (see
Standard Terms & Conditions of XIMEA
) the following additions and specifications apply:
XIMEA warrants to the Original Purchaser that the Camera provided is guaranteed to be free from material and manufacturing defects for a
period of two years. Should a unit fail during this period, XIMEA will, at its option, repair or replace the damaged unit. Repaired or replaced
Products are covered for the remainder of the original Product warranty period.
Warranty is void if any proprietary labeling is removed. This warranty does not apply to units that, after being examined by XIMEA, have
been found to have failed due to customer abuse, mishandling, alteration, improper installation or negligence. If the original camera module
is housed within a case, removing the case for any purpose voids this warranty. This warranty does not apply to damage to any part of
the optical path resulting from removal or replacement of the protective glass or filter over the camera, such as scratched glass or sensor
damage. If the camera is disassembled, reworked or repaired by anyone other than a recommended service person, XIMEA or its suppliers
will take no responsibility for the subsequent performance or quality of the camera.
XIMEA expressly disclaims and excludes all other warranties, express, implied and statutory, including, but without limitation, warranty
of merchantability and fitness for a particular application or purpose. In no event shall XIMEA be liable to the Original Purchaser or any
third party for direct, indirect, incidental, consequential, special or accidental damages, including without limitation damages for business
interruption, loss of profits, revenue, data or bodily injury or death except in case of willful misconduct by XIMEA or employees of XIMEA.
5.5.1
Disclaimer of Warranty
In addition to the provisions of Article XII of the Standard Terms & Conditions of XIMEA GmbH (see
Standard Terms & Conditions of XIMEA
) the following apply:
Although XIMEA has taken care to ensure the accuracy of the information contained herein it accepts no responsibility for the consequences
of any use thereof and also reserves the right to change the specification of goods without notice.
XIMEA does not assume any liability for damage that is the result of improper use of its products or failure to comply with the operating
manuals or the applicable rules and regulations.
XIMEA Technical Manual, Version: v230927
82
