Xilinx Virtex-6 FPGA, Руководство по началу работы

Страница: 33 / 77

Virtex-6 FPGA Connectivity Kit Getting Started www.xilinx.com 33
UG664 (v1.4) July 6, 2011
Evaluating the Virtex-6 FPGA Connectivity TRD
Evaluating the Virtex-6 FPGA Connectivity TRD
The Virtex-6 FPGA Connectivity TRD provides a Performance and Status monitor
application and GUI. The application enables customers to evaluate different system
parameter optimizations. This section demonstrates key performance criteria for the
PCI Express, XAUI, and Raw Data Path (Memory) interfaces.
To evaluate the Virtex-6 FPGA Connectivity TRD:
1. Launch the Performance Monitor for the Virtex-6 FPGA Connectivity TRD:
In Windows:
a. Double-click the xpmon icon on the desktop to launch the Performance Monitor
application.
In Linux:
a. Navigate to the
v6_pcie_10Gdma_ddr3_xaui_axi
folder.
b. Double-click v6_trd_lin_quickstart to launch the Performance Monitor and
Status GUI.
c. A window prompt appears as shown in Figure 21 . Click Run in Terminal to
proceed.
2. Set up the test in the Performance Monitor:
a. Two Data Transmission options are provided:
- XAUI Path
- Raw Data Path
b. These Packet Size options are provided:
- XAUI Path
Minimum Packet Size: Choose a value between 64 - 16384 bytes
Maximum Packet Size: Choose a value between 64 - 16384 bytes
- Raw Data Path
Packet Size: Choose a value between 64 - 32768 bytes