Xilinx Varium C1100, Руководство по установке

Страница: 17 / 26

Chapter 5
Card Bring-Up and Validation
After installing the XRT and deployment platform, the card installation can be verified using the
following commands which are described in subsequent sections.
•
lspci
•
xbmgmt examine
•
xbutil validate
The
lspci
Linux command is used to confirm the card, is seen by the OS, as was done when
installing the card.
The additional commands are used to validate and identify the installed card(s) and report
additional card details including memory, PCIe
® , platform name, and system information. See
xbutil and xbmgmt
Note: Utility command line help can always be obtained using the --help option.
Environment Setup
Set the environment to use the utilities by running the following command. Note that the
command is dependent on the command shell you are using.
Use the following command in csh shell:
$ source /opt/xilinx/xrt/setup.csh
Use the following command in bash shell:
$ source /opt/xilinx/xrt/setup.sh
Running lspci
Confirm the card is detected by the OS:
Chapter 5: Card Bring-Up and Validation
UG1525 (v1.1) March 8, 2022 www.xilinx.com
Varium C1100 Compute Adaptor Installation Guide 17
Send Feedback