Xilinx ML40 Series, Руководство по началу работы

Страница: 13 / 40

ML40x Getting Started Tutorial www.xilinx.com 13
UG083 (v5.0) June 30, 2006
ML40x Demonstrations in System ACE CF
R
ML40 x Demonstrations in System ACE CF
Bootloader
Location
System ACE configuration address 0.
Description
The ML40 x Bootloader demonstration displays a menu of demonstration designs that can
be loaded by using the System ACE controller’s reconfiguration feature. The menu is
displayed on the serial terminal, LCD, and VGA.
To choose a demonstration, use the North-East-South-West navigation buttons
(GPIO_SW_N, GPIO_SW_E…) on the board, then press the center button (GPIO_SW_C) to
start the demonstration. Alternatively, you can select a demonstration by entering its
number into the serial terminal. The demonstrations are:
•
“Virtex-4 Slide Show,” page 14
•
“Web Server (Using Soft Ethernet MAC - ML401/ML402),” page 15
•
“Web Server (Using Hard Embedded Tri-Mode Ethernet MAC - ML403/ML405),”
page 18
•
“DSP48 (ML401/ML402),” page 21
•
“Linux (ML403/ML405),” page 22
•
“ChipScope Pro Tools (ML401/ML402),” page 23
•
“QNX (ML403/ML405),” page 24
•
“USB,” page 25
•
“My Own ACE File,” page 26
•
“Restore CPLD/Flash Images,” page 27
To return to the ML40 x Bootloader at anytime, press the System ACE RST button. The
bootloader runs only if the leftmost configuration address DIP switches are set to
000
and
the configuration source selector switch (3-position slide switch) is set to SYS ACE.