ALINX Xilinx Core Board AC6150 User Manual
17 / 21
www.alinx.com
If you need to debug the core board separately, power the core board
through the Mini USB port (J2) of the core board, the Mini USB cable is
connected to the USB port of the computer.
When the user supplies power to
the core board through the Mini USB port (J2), it cannot be powered through
the carrier board. Otherwise, current conflict may occur and the USB interface
of the computer may be burned out.
Figure 8-2: Mini USB on the Core Board
Part 9: Expansion Ports
The core board has a total of two high-speed expansion ports, which is
connected with the FPGA carrier board by two 100-pin inter-board connectors.
The inter-board connector uses AMP Tyco board-to-board connector
5177984-4, with a PIN pitch of 0.8mm, and a male connector with a height of
5mm. It is connected with the female AMP connector 5177983-4 of the FPGA
carrier board, which is configured for high speed data communication.
Содержание ALINX AC6150
Страница 1: ...Xilinx ALINX Core Board AC6150 User Manual ...
Страница 15: ...ALINX Xilinx Core Board AC6150 User Manual 15 21 www alinx com Figure 7 1 Power Supply on core board schematic ...
Страница 18: ...ALINX Xilinx Core Board AC6150 User Manual 18 21 www alinx com Figure 9 1 Expansion Ports P1 ...
Страница 19: ...ALINX Xilinx Core Board AC6150 User Manual 19 21 www alinx com Figure 9 2 Expansion Ports P2 ...