Activity
Indicator
(Green)
Fault Indicator
(Yellow)
Description
Off
Blinking at 8 Hz
Data on the secondary E1.S drive is
being rebuilt.
Steady on/Off
Steady on
The E1.S drive is faulty.
●
If the VMD function is disabled, the E1.S drive supports only orderly hot swap.
Table 5-19
E1.S drive indicator description (VMD function disabled)
Activity
Indicator
(Green)
Fault Indicator
(Yellow)
Description
Off
Off
The E1.S drive is not detected.
Steady on
Off
The E1.S drive is detected and
operating properly.
Blinking at 2 Hz
Off
Data is being read from or written to
the E1.S drive.
Off
Blinking at 2 Hz
The E1.S drive is being located or
hot-swapped.
Off
Blinking at 0.5 Hz
The E1.S drive has completed the hot
swap process and is removable.
Steady on/Off
Steady on
The E1.S drive is faulty.
5.5.3 RAID Controller Card
The RAID controller card supports RAID configuration, RAID level migration, and
drive roaming.
●
For details about the optional components, consult the local sales representative
or see "OS and Parts Compatibility" in the
.
●
For details about the RAID controller card, see the
5.6 Network
5.6.1 OCP 3.0 NICs
OCP 3.0 NICs provide network expansion capabilities.
●
The FlexIO slot supports an OCP 3.0 NIC, which can be configured as required.
●
For details about the optional components, consult the local sales representative
or see "OS and Parts Compatibility" in the
.
FusionServer 5288 V7 Server
Technical White Paper
5 Hardware Description
Issue 01 (2023-07-20)
Copyright © xFusion Digital Technologies Co., Ltd.
82