Port
Type
Quantity
Description
Serial port
RJ45
1
Default operating system serial
port used for debugging. You
can also set it as the iBMC
serial port by using the iBMC
command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
VGA port
DB15
1
Used to connect a display
terminal, such as a monitor or
KVM.
USB port
USB 3.0
2
Used to connect to a USB 3.0
device.
NOTICE
● The maximum current is 1.3 A
for an external USB device.
● Before connecting an external
USB device, ensure that the
USB device functions properly.
Otherwise, it may adversely
impact the server.
● The USB 3.0 port can be used
to supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is
required.
PSU socket
-
2
Used to connect to a power
distribution unit (PDU) through
a power cable. You can select
the PSUs as required.
NOTE
When determining the PSUs,
ensure that the rated power of the
PSUs is greater than that of the
server.
5.3 Processors
●
The server supports one or two processors.
●
If only one processor is required, install it in socket CPU1.
●
Processors of the same model must be used in a server.
FusionServer 1288H V6 Server
Technical White Paper
5 Hardware Description
Issue 10 (2023-04-30)
Copyright © xFusion Digital Technologies Co., Ltd.
21
