FusionServer 1288H V5 Server
Technical White Paper
5 Hardware Description
2023-02-28
38
Configuration
Maximum Front Hard
Disks
Drive Management
Mode
drives.
slot 1.
10 x 2.5" drive
configuration 3
⚫
Front drive: 10 x 2.5
−
Slots 0 to 5 support
only SAS/SATA
drives.
−
Slots 6 and 7
support
SAS/SATA/NVMe
drives.
−
Slots 8 and 9
support only NVMe
drives.
1 x RAID controller
card/PCH
a
Screw-in RAID controller
card: installed in the RAID
controller card connector
on the mainboard.
⚫
a: A RAID controller card or PCH can be used to manage common drives. The
PCH supports only SATA drives.
⚫
b: The drives can be managed only by the Avago SAS3516 RAID controller
card.
⚫
Contact your local sales representative or use the
determine the components to be used.
5.5.2 Drive Numbering
When the common hard drive management mode is PCH, each SATA drive has a fixed ATA
number. ATA numbers provided in this section are based on the assumption that the hard drive
management mode is PCH. The following table lists the mapping between ATA numbers and
physical hard drive numbers.
⚫
4 x 3.5" drive configuration
Figure 5-23
Drive numbering
⚫
8 x 2.5" drive configuration
Figure 5-24
Drive numbering