FusionServer 1288H V6 Server
Technical White Paper
5 Hardware Description
2022-06-25
19
Silkscreen
Indicator and
Button
Description
UID
button/indicator
The UID button/indicator helps identify and locate a
device.
UID indicator:
⚫
Off: The device is not being located.
⚫
Blinking or steady blue: The device is being
located.
UID button:
⚫
You can control the UID indicator status by
pressing the UID button or using the iBMC.
⚫
You can press this button to turn on or off the
UID indicator.
⚫
You can press and hold down this button for 4 to
6 seconds to reset the iBMC.
iBMC direct
connect
management
port indicator
Indicates the status when the iBMC direct connect
management port connects to a terminal (local PC or
Android mobile phone):
⚫
Off: No terminal is connected.
⚫
Blinking green at short intervals for 3 seconds and
then off: The port is disabled.
⚫
Steady green: The terminal is connected.
Indicates the status when the iBMC direct connect
management port connects to a USB device:
⚫
Blinking red at long intervals: The job fails or an
error is reported when the job is complete.
⚫
Blinking green at short intervals: The job is being
executed.
⚫
Blinking green at short intervals for 3 seconds and
then off: The port is disabled.
⚫
Steady green: The server configuration file is
being copied from the USB device or the job is
successfully completed.
5.1.3 Ports
Port Positions
⚫
4 x 3.5" drive configuration