XETEC GRAVITY MK2 SERIES 5G-900
Congratulations for buying this
XETEC
product and thank you for your
confidence! With this
XETEC
amplifier you have purchased an innovative
and professional high-end product, which will enable you to enjoy your
music on a very high quality level for many years. We have especially focused
on electronic as well as product design to give you a product that will
accompany you for many years, as our products are always one step ahead
and will still be modern for many years.
XETEC
products represent the
experience our engineers have made through many years assisted by car
audio magazines as well as professional installers.
Please read these instructions very carefully, to avoid unnecessary trouble
and defects. In case of trouble, please contact your local dealer or check
our website www.xetec.de for troubleshooting. There we also offer up-to-
date hints and technical support for you.
The
XETEC 5G-900
is a state-of-the-art 5-channel car audio amplifier,
especially developed for top quality speaker systems and subwoofers.
A perfect choice are the
XETEC
Component systems and subwoofers.
You can also run each 2 of the 4 satellite channels in bridged mode to gain
more than twice the output power, in order to drive midbasses or high
power component systems.
The versatility and many adjustment options make the
5G-900
an allround
genius for car music reproduction.
PROPERTIES
• High efficiency Class D Digital subwoofer amplifier
• Four HPAA (High Precision Analog Amplifier) in satellite channels
• BLC (Bass Level Controller)
• Input Select (6-, 4- or 2-channel input modes)
• Independent low- and highpass filters (bandpass possible)
• Bridgeable satellite channels
• Optional carEQ
â
module (car -specific parametric equalizer module)
(see chapter 5. „carEQ
â
”)
• Protection circuit: Overload, Short-circuit, DC, Overheat
SAFETY
• Before you make any connection, the battery must be
disconnected!
• A main fuse must be installed into the +12 V wire within the
first 12" from the + terminal of the battery (insurance
regulation!).
• Please note that a minimum speaker impedance of 2 Ohms
must be maintained. Do not connect speakers with lower
impedance in normal as well as in bridged mode!
• Make sure that you do not use defective speakers and
subwoofers. They can cause damage to your amplifier!
The fuses inside the amplifier only protects the device itself, not the battery
and the car!
IMPORTANT NOTICE: STABILITY OF AMPLIFIER S
Normal operation:
Every amplifier is only capable of driving loads (speakers) up to a certain
limit, which is set either by the protection circuits or the maximum power
output.
XETEC
amplifiers accept loads down to 2 Ohms in normal operation.
Bridged mode:
In bridged mode each two channels of the amplifier are driving the same
load, the acceptable impedance for each channel is also divided by two!
That means:
A normal amplifier „sees” 4 Ohms as 4 Ohms. In a bridged amplifier, each
amplifier „sees” 2 Ohms only!!! That´s why in bridged mode always 4 Ohms
must be maintained although the amplifier might be 2-Ohms stable.
CAUTION
This product is capable of conducting very high sound pressure
levels, and can thus be harmful to your health. Prolonged exposure
to high volume levels can cause hearing loss! Please use restraint
on the volume control. XETEC wants you to enjoy your amplifier
for a long time to come, and we do not take responsibility for
hearing loss nor other health problems
.
1
Содержание Gravity MK2 5G-900
Страница 1: ......
