![background image](http://html1.mh-extra.com/html/xerox/workcentre-m118/workcentre-m118_remanufacturing-instructions_4064082009.webp)
19. Lift off the cover and locate the chip.
20. From the inside of the cover remove and replace the chip.
21. Remove all the old developer from the hopper.
22. Pour in the new developer.
Make sure you cover both augers.
XEROX WORKCENTRE M118
•
128 DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com