![background image](http://html.mh-extra.com/html/xerox/workcentre-6605/workcentre-6605_service-manual_884418591.webp)
Maintenance
Xerox Internal Use Only
Phaser 6600 and WorkCentre 6605
Service Manual
6-23
Adjusting the Fuser
The Fuser uses heat and pressure to bond the toner image to the paper. For optimal print quality, the
printer automatically adjusts the temperature of the Fuser when you change the paper type. Because
of differences in paper construction and thickness, the adjustment made by the printer is not enough
or is too much for all paper types. If the Fuser temperature is too low, the toner will not properly bond
to the paper. If the Fuser is too hot, the paper can curl.
Changing the Fuser temperature for a particular paper type requires entering Service Mode and editing
NVM using a specific Chain-Link code. Refer to “NVM Read and Write (Edit NVM)” on page 2-28 for
detailed instructions on editing NVM values.
To adjust the Fuser:
1.
Identify the paper type for which you need to adjust the fuser temperature.
2.
Enter Service Mode and navigate to
Printer Diag > Engine Diag > NVM Settings > Edit NVM.
3.
Enter the Chain-Link code for the paper identified in step 1. Refer to the table for the appropriate
Chain-Link code.
4.
Adjust the value up or down as necessary, using one of the following settings:
-9, -6, -3, 0 (default), +3, +6, +9.
The value of the setting raises (if positive) or lowers (if negative) the Fuser temperature by that
many degrees celsius above or below the default temperature for the specified paper type and
printer speed. For example, en3 will raise the temperature by 3° C.
Media Name
Media Mode
Chain-Link Default
Plain
Plain-H
744
016
0
Special
Heavier - L
744
017
0
Hole Punched
Plain-L
744
018
0
Colored
Plain-L
744
019
0
Lightweight Cardstock
Heavier-L
744
036
0
Heavyweight Cardstock
Heavier-H
744
037
0
Labels
Label-H
744
039
0
Envelope
Envelope
744
041
0
Lightweight Glossy
Cardstock
Coated-M
744
044
0
Heavyweight Glossy
Cardstock
Coated-H
744
045
0
Содержание WorkCentre 6605
