Xerox WorkCentre 6027, Руководство пользователя

Страница: 50 / 226

Installation and Setup
50 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
11. Using the keypad, enter the address as X.X.X.X, where X is a number from 0–255:
− To clear an existing number from a cell, press Clear .
− To enter a one or two-digit number, to advance to the next cell, touch the Right arrow.
When you enter the third digit of a three-digit number, the cursor automatically advances to
the next cell.
− After entering the number in the last cell, touch OK .
12. At the Restart System prompt, touch Close .
13. Touch Gateway Address .
14. Using the keypad, enter the address as X.X.X.X, where X is a number from 0–255:
− To clear an existing number from a cell, press Clear .
− To enter a one or two-digit number, to advance to the next cell, touch the Right arrow.
When you enter the third digit of a three-digit number, the cursor automatically advances to
the next cell.
− After entering the number in the last cell, touch
OK
.
15. At the Restart System prompt, touch
Close
.
16. Turn off the printer, then turn it on again.
See also:
Online Support Assistant at:
www.xerox.com/office/WC6027support
Changing the IP Address Using CentreWare Internet Services
To change the IP address of the printer using CentreWare Internet Services:
1.
At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return .
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer on
page 27.
2. Click the Properties link.
If the Protocols link is not expanded under Properties, scroll to the Protocols link and expand it.
3. Click TCP/IP .
4. In the IPv4 section of the page, make the desired changes. For example, to change the way the
printer acquires the IP address, in the Get IP Address field, select a method from the drop-down list.
5. After changing the address information, scroll to the bottom of the page and click
Save Changes
.