![background image](http://html.mh-extra.com/html/xerox/workcentre-6027/workcentre-6027_user-manual_884372025.webp)
Features
Xerox
®
WorkCentre
®
6027 Multifunction Printer
25
User Guide
Power Saver Mode
You can set the time the printer spends idle in ready mode before the printer transitions to a lower
power level.
There are two levels of Power Saver mode.
•
Mode 1 (Low Power)
: The printer shifts from Ready mode to Low Power mode to reduce standby
power consumption.
•
Mode 2 (Sleep)
: The printer shifts from Low Power mode to Sleep mode for a greater reduction in
power consumption.
Changing Power Saver Mode Settings on the Control Panel
To change the Power Saver mode settings:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Touch
System Settings
, then touch
General
.
4.
Touch
Power Saver Timer
.
5.
Touch either
Low Power Timer
or
Sleep Timer
.
6.
To increase or decrease the number of minutes before the printer enters Power Saver mode, touch
the Plus (
+
) or Minus (
-
) buttons, then touch
OK
.
Exiting Power Saver Mode
The printer exits Power Saver mode automatically when it receives data from a connected device.
To exit Power Saver mode manually, on the control panel, press the
Power Saver
button.