Maintenance
170
Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
Refreshing the Toner
Toner Refresh recalibrates toner concentration and developer voltages. If you print documents with high
or low ink coverage, Toner Refresh can optimize print quality.
To refresh the toner:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
, then touch
Admin Settings
.
3.
Using the keypad, type the passcode as needed.
4.
Touch
Service Tools
.
5.
Touch
Toner Refresh
.
6.
Touch the toner color to refresh, then touch
Refresh
.
The process runs automatically. Wait one minute for the process to complete and the printer to
return to Ready mode.
Note:
Do not use this procedure repeatedly. Running the procedure repeatedly uses the toner supply
more quickly.
Cleaning the Developer
The Clean Developer feature runs the developer motor and stirs the toner in the toner cartridge. Use
Clean Developer to clean toner from a cartridge just before changing it or to refresh the toner after
replacing a toner cartridge.
To clean the developer:
1.
At the printer control panel, press the
Machine Status
button.
2.
Touch
Tools
>
Admin Settings
.
3.
Touch
Service Tools
, then touch
Clean Developer
.
4.
Touch
Start
>
Start
.
Wait one minute for the process to complete and the printer to return to Ready mode.
5.
To return to the Maintenance menu, touch
Close
.
Recycling Supplies
For more information on the Xerox
®
supplies recycling program, go to: