Xerox WorkCentre 5019, Сервисная документация

Страница: 277 / 457

08/2012
6-8 WorkCentre 5021/5019
6.1.7
Initial Issue General Procedures
6.1.7 Installation Space
6.1.7.1 Installation Space
Sufficient space must be made available around the machine for performing activities such as
loading paper, refilling, retrieving printouts, replacing consumables, clearing Jams, mainte-
nance inspection, and etc., as well as to ensure that the machine's performance can be main-
tained.
• Width: The max. width with the MSI Tray pulled out is 921 mm.
• Depth: The depth with the Tray pulled out is 960 mm. (Including the Front Cover)
The installation space includes the following working space.
• Width: 80 mm added to the left and 100 mm added to the right
• Depth: 400 mm added to the front (for pulling out of Tray) and 100 mm added to the back
(for air circulation)
6.1.7.2 Occupied Space
The occupied space may include a fully extended Bypass Tray and Output Tray.
6.1.7.3 Installation Space Details
1. Main Unit (w/Platen Cover)
• Installation Space (W x D): 1101 mm x 1460 mm (Figure 1)
Figure 1 j0lj60008
2. Main Unit (w/DADF) + STM
• Installation Space (W x D): 1101 mm x 1460 mm (Figure 2)
Figure 2 j0lj60009
3. Main Unit (w/DADF) +STM+ Stand
Table 1
Configuration Width (mm) Depth (mm) Area (square meters)
Main Unit (w/Platen Cover or
w/DADF) 1101 1460 1.61
Main Unit + STM 1101 1460 1.61
Main Unit + STM + Stand 1101 1460 1.61
Table 2
Configuration Width (mm) Depth (mm) Area (square meters)
Main Unit + Platen Cover 947 569 0.54
Main Unit + Platen Cover + STM 947 569 0.54
Main Unit + Platen Cover + STM +
Stand 947 685 0.65
Main Unit + DADF 972 569 0.56
Main Unit + DADF + STM 972 569 0.56
Main Unit + DADF + STM + Stand 972 685 0.66