Xerox Versant 4100 Press, Пользовательская документация

Страница: 19 / 430

LLooccaattiinngg tthhee PPrreessss SSeerriiaall N Nuum mbbeerr
The press serial number can be accessed from the User Interface (UI) or by locating the serial number
plate on the inside frame of the first feeder tray (Tray 1).
1. Press the Machine Status button on the UI.
2. From the Machine Status screen, ensure that the Machine Information tab is displayed.
The press serial number is displayed under
General Information
.
3. If there is a loss of power and it is not possible to access the
Machine Status
screen, the press
serial number can also be found on the inside frame of the press near paper Tray 1:
a. At the press, fully open paper Tray 1.
b. At the left of the feeder tray, on the press frame, locate the plate with the serial number
(
SER# ).
A Addvvaanncceedd O Ovveerrssiizzeedd H Hiigghh C Caappaacciittyy FFeeeeddeerr ((TTrraayyss 66 aanndd 77))
Tip: The Advanced Oversized High Capacity Feeder is part of the standard press configuration.
The Advanced Oversized High Capacity Feeder contains Trays 6 and 7. These trays feed a variety of
stock sizes, including standard, heavyweight, and large-sized stocks up to 330 x 488 mm (13 x 19.2
in.) in size and weighing between 52 g/m
2 and 400 g/m 2 . Each tray holds 2,000 sheets of coated and
uncoated stock.
Note: For Versant ® 4100 Press, the Advanced Oversized High Capacity Feeder (Trays 6 and 7)
includes the Tray 5 (Bypass). It is a part of the standard press configuration.
The following illustration show the Trays 6 and 7 with the Tray 5 (Bypass).
Xerox ® Versant ® 4100 Press
User Documentation
19
Learning About