PPeerrffoorrm
miinngg aa C
Coolloorr RReeggiissttrraattiioonn A
Addjjuussttm
meenntt
A color-registration adjustment occurs every time a new toner cartridge is installed. You can run this
adjustment at other times as needed.
To perform a color-registration adjustment:
1. At the printer control panel, press the
Home
button.
2. Touch
Device
→
Support
→
Color Registration
.
3. To perform an Automatic Color Registration adjustment, touch
Start
.
4. At the successfully completed prompt, touch
Close
.
5. To exit the menu, touch
X
.
6. To return to the Home screen, press the
Home
button.
A
Addjjuussttiinngg PPaappeerr RReeggiissttrraattiioonn
Use Image Position to adjust the placement of the printed image on the page. The adjustment
allows you to place the top, bottom, left, and right margins exactly where you want. You can specify
the image position on both the front and back sides of the paper, for each installed paper tray.
V
Veerriiffyyiinngg PPaappeerr RReeggiissttrraattiioonn
1. At the printer control panel, press the
Home
button.
2. Log in as administrator. For details, refer to the
System Administrator Guide
at
or
www.xerox.com/support/VLC9000docs
.
3. Touch
Device
→
Support
→
Image Position
.
4. Select the source paper tray for the registration print.
a. Touch
Paper Supply
.
b. Touch the tray that you want to use.
5. If your printer has automatic 2-sided printing, select the sides that you want to optimize.
• To select a sample registration page for adjusting side 1, touch
Side to Adjust
, then touch
Side 1
.
• To select a sample registration page for adjusting both sides, touch
Side to Adjust
, then touch
Side 2
.
6. Specify the consecutive number of sample pages to print.
a. Touch
Print Settings
.
b. To increase or decrease the number of sample pages, for Quantity, touch the Plus icon (
+
) or the
Minus icon (
-
), then touch
OK
.
7. To print the sample pages, touch
Print Sample
.
8. When printing is completed, touch
Close
.
152
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
