Xerox VersaLink C405dn, Руководство пользователя

Страница: 199 / 272

Probable Causes Solutions
The job is complex. Wait. No action needed.
The print-quality mode in the driver is set to
Enhanced. Change the print-quality mode in the print driver to
Standard.
D Dooccuum meenntt PPrriinnttss ffrroom m W Wrroonngg TTrraayy
Probable Causes Solutions
Application and print driver have conflicting tray
selections. 1 Check the tray selected in the print driver.
2 Access the page setup or printer settings of the
application from which you are printing.
3 Set the paper source to match the tray selected in
the print driver or set the paper source to
Automatically Select .
4 Check that you have the latest print driver
installed. For details, go to www.xerox.com/office/
VLC405support .
Note:
To have the print driver select the tray,
set the tray used as the paper source to Auto
Selection Enabled .
A Auuttoom maattiicc 22--SSiiddeedd PPrriinnttiinngg PPrroobblleem mss
Probable Causes Solutions
Unsupported or incorrect paper. Ensure that you are using a supported paper size and
weight for 2-sided printing. Envelopes, cardstock, and
labels cannot be used for 2–sided printing. For more
information, refer to
Supported Paper Types and
Weights for Automatic 2-Sided Printing .
Your printer model is not configured with automatic
2-sided printing. Ensure that your printer supports automatic 2-sided
printing. For more information, refer to
Printer
Configurations and Options .
Incorrect setting. In the print driver Printing Options tab, select 2–
Sided Print .
Xerox ® VersaLink ® C405 Color Multifunction Printer
User Guide
199
Troubleshooting