Xerox VersaLink B70 Series, Руководство пользователя

Страница: 205 / 285

Probable Causes Solutions
could be a network or printer installation issue. For
more help, contact the system administrator.
The job is complex. Wait. No action needed.
The print-quality mode in the driver is set to
Enhanced. Change the print-quality mode in the print driver to
Standard.
D Dooccuum meenntt PPrriinnttss ffrroom m W Wrroonngg TTrraayy
Probable Causes Solutions
Application and print driver have conflicting tray
selections. 1 Check the tray selected in the print driver.
2 Access the page setup or printer settings of the
application from which you are printing.
3 Set the paper source to match the tray selected in
the print driver or set the paper source to
Automatically Select .
4 Check that you have the latest print driver
installed. For details, go to www.xerox.com/office/
VLB70XXsupport .
Note:
To have the print driver select the tray,
set the tray used as the paper source to Auto
Selection Enabled .
A Auuttoom maattiicc 22--SSiiddeedd PPrriinnttiinngg PPrroobblleem mss
Probable Causes Solutions
Unsupported or incorrect paper. Ensure that you are using the correct paper. Do not
use transparencies, envelopes, labels, or reloaded
paper for automatic 2-sided printing. For details, see
Supported Standard Paper Sizes for Automatic 2-
Sided Printing
.
Incorrect setting. On the print driver Printing Options tab, select 2-
sided Printing .
Xerox ® VersaLink ® B70XX Multifunction Printer
User Guide
205
Troubleshooting