Xerox Telecopier 7033, Руководство по обслуживанию, Страница: 48 / 286

3. Print Quality
Section Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.1 Test Pattern Samples
3.1.1 Test Pattern Type A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.1.2 Test Pattern Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
3.1.3 Test Pattern 82P151 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
3.2 Image Defect Samples
3.2.1 Blurred Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
3.2.2 Obscured Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
3.2.3 Light Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
3.2.4 Deletions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
3.2.5 Ghost Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
3.2.6 Wrong Size Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
Introduction
The Image Quality (IQ) section is used to identify an image quality
problem.
The Test Pattern Samples are reproductions of acceptable image quality
of Diagnostic Test Patterns generated by the terminal and Test Pattern
82P151 copied on the terminal.
Use the Image Defect Samples as a comparison to identify any image
quality defects which may have been produced during System Check.
8/91
Telecopier 7032 / 7033 Service Manual 3-1
Section Contents, Introduction
www.printcopy.info
www.printcopy.info