Xerox Phaser EX7750, Руководство по управлению заданиями

Страница: 36 / 216

2
2-8 Introduction to Command WorkStation and Command WorkStation LE
Activity Monitor
The Activity Monitor displays a summary of the job activity on all EX7750 servers or a
selected EX7750. The activity shown can include jobs released for spooling, processing
(RIPping), or printing. Held jobs do not appear in the Activity Monitor.
Display the Activity Monitor by choosing Activity Monitor from the Windows menu.
In Command WorkStation, you can use the server selection menu in the Active Jobs
window to display job activity for an individual EX7750, or for all servers (see
“Monitoring single or multiple EX7750 servers*” on page 2-12).
All Servers view*
In Command WorkStation, the All Servers view of the Activity Monitor summarizes
the activity on all connected EX7750 servers.
•
Server Name
—Each EX7750 appears in a Server Name bar. Click the bar to expand
or collapse activity information for a particular EX7750.
•
Spooling, processing, and printing jobs
—When you expand the Server Name
bar for an EX7750, any current job activity on that EX7750 appears next to a
corresponding status box (spooling, processing, or printing). If the Command
Workstation for the EX7750 is connected to more than one printer, the printer
handling the job is listed under the job name. When no activity occurs on the
EX7750, the status boxes read Idle.
•
Error conditions
—When an error occurs, the Server Name bar for the affected
EX7750 appears highlighted in red. Details of the error appear under the
expanded bar.