Xerox Phaser EX7750, Руководство по настройке

Страница: 77 / 220

4
4-17 Network Setup options
T
O ACCESS
N
ETWORK
S
ETUP OPTIONS
1. Confirm that the network cable is connected to the EX7750.
During Network Setup, the EX7750 queries the network for zones, servers, and
server-based queues. If you perform Network Setup without a connected and
functioning network, default settings are used that may not meet your needs.
2. Choose Network Setup from the main Setup menu.
3. Choose Port Setup from the Network Setup menu.
4. Choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings.
5. When you finish entering port settings, choose Exit Port Setup, and then choose
Protocol Setup.
6. Enter the appropriate settings for the protocol(s) you use.
7. When you finish entering protocol settings, choose Exit Protocol Setup, and then
choose Service Setup.
8. Enter the appropriate settings for the services you use.
The options are described in detail in the following pages.
T
O EXIT
N
ETWORK
S
ETUP
1. When you finish entering service settings, choose Exit Network Setup.
2. Choose Yes when prompted to save changes.
3. Choose another Setup or choose Exit Setup from the main Setup menu.