Xerox Phaser EX7750, Руководство по цветам, Страница: 98 / 120

3
3-34 ColorWise Pro Tools
4. Place the ES-1000 over the target color, making sure to center the sample aperture
over the color. Press Measure to take the measurement.
The measured CMYK values are imported into Spot-On as follows:
• If an individual color is selected in the color list, it updates to the measured color.
• If a group is selected in the color list, a new color with the measured values is created
within the group.
• If the Spot-On Color Search window is open, the center patch updates with the
measured values, and the neighbor patches update accordingly.
• If the Set Center Patch Color dialog box is open, the measured values are imported
into the CMYK entry fields.
5. When you finish taking color measurements, choose Stop from the Instrument menu.
Spot-On closes the connection to the instrument.
Saving changes and exiting Spot-On
To enable your spot color matches for use on the EX7750, you must save your edits
before exiting Spot-On. This action ensures that all your changes to Spot-On color
definitions are stored on the EX7750 and available for use when printing documents
that contain spot colors.
The following edits do not require saving to take effect:
• Rearranging the priority level of a color group
• Downloading a color group
• Clearing or deleting a color group
T
O SAVE THE
S
POT
-O
N COLOR LIST
1. Choose Save from the File menu.
2. Click Close in the upper-right corner of the Spot-On main window to exit the utility.