Xerox Phaser 6510 Скачать руководство пользователя

Страница: 66 / 236

Paper and Media

Configuring Trays 1 or 2 for the Paper Length

You can adjust the lengths of trays 1 and 2 to accommodate A4/Letter and Legal paper sizes. In the

Legal length settings, the trays protrude from the front of the printer.

To change Trays 1 and 2 to match the paper length:
1.

Remove all paper from the tray.

To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly,

then pull it out.

To compress the tray for shorter paper, hold the back of the tray with one hand. With the other

hand, press the release latch at the front of the tray, then push the ends inward until they latch.

To extend the tray for longer paper, hold the back of the tray with one hand. With the other hand,

press the release latch at the front of the tray and pull the ends outward until they latch.

To protect the paper when the tray is extended, place the paper cover over the extended section of

the paper tray.

Xerox

Phaser

6510 Color Printer

User Guide

Содержание Phaser 6510













































































































































































































































Результаты поиска

Содержание Phaser 6510

Отзывы:

Похожие инструкции для Phaser 6510

Бренды по названию

Популярные бренды

Xerox Phaser 6510, Руководство пользователя

Результаты поиска

Содержание Phaser 6510

Отзывы:

Похожие инструкции для Phaser 6510

Бренды по названию

Популярные бренды