Xerox Phaser 6510, Руководство пользователя

Страница: 193 / 236

System Administrator Functions
Configuring SSL Settings in the Embedded Web Server
Secure Sockets Layer (SSL) is a protocol that creates an encrypted connection between your printer and
a server.
Note: To enable SSL, a digital certificate is required.
To create a digital certificate:
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press
Enter
or
Return
.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click
System
>
Security
.
4. For Certificates, click
Security Certificates
.
5. From the Security Certificates menu, select Device Certificates .
6. Click Create , then select Create Self-Signed Certificate .
7. Select your Hash Algorithm and Public Key Length. For assistance, contact your system administrator.
8. To set the number of days for the certificate to remain valid, type the desired number of days in the
Validity Period field.
9. Click
Create
.
10. To return to the Security Certificates page, at the prompt, click
Close
.
11. To close the Security Certificates page, click Close .
To configure the SSL Settings:
1.
At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return .
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click System > Security .
4. For Network Security, click SSL/TLS Settings .
5. Select one or more protocols from the list of SSL and TLS protocols.
6. To select a Device Certificate for the server, click in the Device Certificate - Server area, then select a
certificate from the list.
7. To enable SSL communication, click the HTTP - SSL/TLS Communication toggle button.
8. For HTTP - SSL/TLS Port Number, type a valid port number.
CAUTION:
Before changing the default value of 443, contact your system administrator.
9. If your LDAP server requires SSL communication using LDAP authentication, click the LDAP -
SSL/TLS Communication
toggle button.
10. To enable SSL communication for SMTP, click SMTP - SSL/TLS Communication , then select an
option.
11. If necessary for your environment, click the
Verify Remote Server Certificate
toggle button, then
click OK .
12. To activate your changes, at the prompt, click Restart Now .
Note: A check mark on the toggle button indicates that the setting is enabled.
Xerox
®
Phaser
®
6510 Color Printer 193
User Guide