Xerox PHASER 6130, Руководство по обслуживанию

Страница: 200 / 454

4-16 Phaser 6130 Color Laser Printer Service Manual
General Troubleshooting
Clear All NVM Clear All NVM
■
OK?
■
Processing
■
Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Clears all NVRAM of the Controller.
Clear Job
History Clear JobHistory
■
OK?
■
Processing
■
Initialized
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
run the test>
Deletes the job history data.
Note: Job History can also be
initialized by Clear All NVM .
Clear
Auditron PV Not used in this printer.
Test Print Provides various test prints to be used for troubleshooting the
printer.
No Image IOT No Image IOT
■
Ready
■
Processing
Prints a blank page.
Pattern IOT Pattern IOT
■
Ready
■
Processing
Prints the printer built-in Test Pattern
600 DPI. This test checks the print
function of the printer.
Grid 2 ESS Grid 2 ESS
■
Ready
■
Processing
Prints the Controller built-in grid
pattern. This test checks the print
function of the printer.
Cyan 20% ESS Cyan 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
cyan on the whole page.
Magenta 20%
ESS Magenta 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
magenta on the whole page.
Yellow 20%
ESS Yellow 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
yellow on the whole page.
Black 20% ESS Black 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
black on the whole page.
CMY 20% ESS CMY 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
cyan, magenta, and black combined on
the whole page.
Test Control Panel Display Test Description