![background image](http://html1.mh-extra.com/html/xerox/phaser-4620/phaser-4620_service-manual_4208243072.webp)
5/2011
2-48
Phaser 4600/4620 Printer Service Manual
09-230-00, 09-250-00, 09-240-00
Revision - Xerox Internal Use Only
Status Indicator RAPS
09-230-00, 09-250-00 Toner Cartridge CRUM Write/Read
Error RAP
09-230-00 Fail to write the information to the Toner Cartridge CRUM.
09-230-00 Fail to read the information from the Toner Cartridge CRUM.
BSD-Reference:
WD 7
Initial Actions
•
Cycle system power.
•
Replace the Toner Cartridge.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Check the Toner Cartridge CRUM connection. The connection is clean and undamaged.
Y
N
Cycle system power. The error message is displayed.
Y
N
Reassemble and perform
SCP 6
Final Actions.
Replace the Toner Cartridge. The error message is displayed.
Y
N
Reassemble and perform
SCP 6
Final Actions.
Remove the Right Cover (
REP 28.2
) and reseat CN2 on the MCU Board. The error
message is displayed.
Y
N
Reassemble and perform
SCP 6
Final Actions.
Replace the MCU Board,
REP 9.8
.
Remove the Left Cover (
REP 28.3
) and check the toner CRUM harness. The harness is con-
nected and undamaged.
Y
N
Repair or reconnect the harness.
Replace these components in order until the error is corrected.
1.
Joint Board,
PL 9.15 Item 7
2.
MCU Board,
PL 3.10 Item 3
09-240-00 Toner Cartridge Communications Error RAP
09-240-00 Fail to communicate with the Toner Cartridge CRUM.
NOTE: Messages are different based on the Toner Fault Count.
BSD-Reference:
WD 7
Initial Actions
•
Cycle system power.
•
Replace the Toner Cartridge.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Check the Toner Cartridge CRUM connection. The connection is clean and undamaged.
Y
N
Cycle system power. The error message is displayed.
Y
N
Reassemble and perform
SCP 6
Final Actions.
Replace the Toner Cartridge. The error message is displayed.
Y
N
Reassemble and perform
SCP 6
Final Actions.
Remove the Right Cover (
REP 28.2
) and reseat CN2 on the MCU Board. The error
message is displayed.
Y
N
Reassemble and perform
SCP 6
Final Actions.
Replace the MCU Board,
REP 9.8
.
Remove the Left Cover (
REP 28.3
) and check the toner CRUM harness. The harness is con-
nected and undamaged.
Y
N
Repair or reconnect the harness.
Replace these components in order until the error is corrected.
1.
Joint Board,
PL 9.15 Item 7
2.
MCU Board,
PL 3.10 Item 3
Содержание Phaser 4620
