![background image](http://html1.mh-extra.com/html/xerox/phaser-4620/phaser-4620_service-manual_4208243044.webp)
5/2011
2-20
Phaser 4600/4620 Printer Service Manual
04-400-00, 04-500-00
Revision - Xerox Internal Use Only
Status Indicator RAPS
Test Lift Motor operation in the affected Feeder. The Lift Motor rotates.
Y
N
Remove the Right Cover (
REP 7.25
), reseat CN2 on the Feeder Board, then retest. The
Lift Motor rotates.
Y
N
Check the Feeder Upper Option Harness. The harness is undamaged.
Y
N
Repair or replace the harness,
REP 7.31
.
Replace the Lift Motor,
REP 7.7
, then retest. The Lift Motor rotates.
Y
N
Replace the Feeder Board,
REP 7.28
.
Reassemble and perform
SCP 6
Final Actions.
Reassemble and perform
SCP 6
Final Actions.
Replace these components in order until the error is corrected.
1.
Tray,
PL 7.10 Item 23
2.
Feeder Board,
PL 8.30 Item 7
3.
MCU Board,
PL 3.10 Item 3
04-500-00 Main Motor Failure RAP
04-500-00 An error occurred in the Main Drive Assembly.
BSD-Reference:
WD 5
Initial Actions
•
Close the Top Door.
•
Check for obstructions blocking the latch.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
CAUTION
Cover the Drum Cartridge to prevent light exposure.
Cycle system power. The error message is displayed.
Y
N
Perform
SCP 6
Final Actions.
Select
dC330
code 04-100. All motors rotate.
Y
N
Remove the Right Cover (
REP 7.25
), reseat CN5 and CN9 on the MCU Board, then
retest. All motors rotate.
Y
N
Manually rotate the motors. The motors turn freely.
Y
N
Remove the Toner and Drum Cartridges and manually rotate the motors. The
motors turn freely.
Y
N
Replace the Main Drive Assembly,
REP 4.1
,
Replace the affected cartridge.
Check the Main Drive Assembly harnesses. The harnesses are undamaged.
Y
N
Repair the harness.
Replace the Main Drive Assembly,
REP 4.1
, then retest. All motors rotate.
Y
N
Replace the MCU Board,
REP 3.4
.
Reassemble and perform
SCP 6
Final Actions.
Reassemble and perform
SCP 6
Final Actions.
Replace these components in order until the error is corrected.
1.
MCU Board,
PL 3.10 Item 3
2.
HVPS,
PL 1.10 Item 1
A
Содержание Phaser 4620
